Optimized production methods and material selection allow for grinding in accordance with our defined grinding protocol in a specified area. In constant load tests in accordance with DIN EN 1SO 14801, which are so important for approvals, SDS has demonstrated that the mechanical properties do not change whether the implants are ground down or not.

All SDS implants are self-tapping and, in most cases, can be placed as immediate implants.

In the case of the zirconia used by SDS, the gingiva behaves similarly in the area of the of the implant shoulder to how it does on bone. It can grow onto the implant shoulder and create a bacteria-proof seal. We do NOT want to destroy this valuable seal, e.g. by using gingiva formers.

The screw connection has the sole purpose of securely fixing the abutment at the target depth during the cementation process.

This is ensured constructively by choosing the appropriate thread pitch.

TZP-A zirkonia

Depending on the producer, there are two different manufacturing methods for different geometries. Implants and abutments are either ground from

“waves” that have been sintered through or milled from pre-sintered “rods” and then sintered through. The different manufacturing methods have no effect on the product properties. Our producers have continually improved their production processes over the past decades and achieve identical results in the meaningful DIN EN ISO 14801 constant load test.

They are less complex than two-piece implants and better represent the idea of a replacement tooth that is as close to a natural tooth as possible, as they can be more easily individualized by simply grinding them down. Furthermore, fewer sessions are required from the implant placement procedure to the final prosthetic restoration.

There are four basic rules:

• The prosthetic restoration of SDS implants is similar to that of a natural tooth.
• Individualization of the abutment post and the implant shoulder can be easily achieved using a Red Ring grinding wheel in accordance with our grinding protocol. Read more in our Prosthetics manual
• When using tissue-level two-piece SDS implants, a one-piece implant is created from the two-piece implant by cementing the abutment.
T
• he final crown/bridge must always be cemented onto the implant shoulder so that chewing pressure is transferred across the entire implant.

Detailed information on this topic can be found in our media library.

The Dynamic Thread™ has an especially aggressive design in the lower third of the implants and ensures sufficient primary stability. Furthermore, there is an extremely large selection of implant diameters and lengths in order to ensure that the optimal implant is always placed. In Dr. Ulrich Volz’ 3 HRS FAST LANE CERTIFICATION COURSE and on our SDS video portal, we also explain to you corresponding techniques that have been specially developed and optimized for SDS implants.

SDS has a very generous claims policy and a LIFETIME WARRANTY on all Series 1.1/1.2 and 2.0/2.2 implants.

WE HAVE LEARNT TO THINK IN TERMS OF CERAMICS
SDS has a sophisticated ceramic implant system that allows users to perform implants for any indication that can also be treated with titanium implants. Based on experience gathered with zirconia implants over more than 20 years and daily use at the company’s own SWISS BIOHEALTH CLINIC, SDS solutions have been continuously developed and optimized. Only the products that have proven themselves during everyday clinical practice are brought to the market for our customers.

-> In order to safely treat all indications with ceramic implants, the SDS portfolio includes one- and two-piece implants in various diameters (3.2 mm to 7 mm) and different lengths (6 mm to 17 mm), special shapes, sinus implants and short implants with a length of 6 mm.

CERAMIC IMPLANTS ARE SIMPLER—BUT DIFFERENT
For all of these implants, we have the corresponding bone class based drilling protocol. The surgical protocol is designed in such a way that an insertion torque of 35 Ncm is never exceeded, meaning that the bone is not overheated or damaged during the insertion process. This is especially important, as zirconia implants and drills do not dissipate heat.

The SWISS BIOHEALTH CONCEPT—biological dentistry with ceramic implants: In addition to the ceramic implant system, SDS adopts the treatment concept of treating patients in a fully biological manner. This entails the removal of metal and the elimination of interference fields before progressing to the solution that preserves bone and soft tissue. Besides providing an esthetically pleasing complete dental solution, this also means making a significant contribution to improving the patient’s health. We improve the health of patients, and ever more patients are asking for exactly this.

All of these concepts and techniques are taught at the company’s own training center. Our knowledge and experience is shared and passed on.

-> Benefit: In Dr. Ulrich Volz’ user course, you will gain the benefit of his experience and learning curve spanning 27 years within just two days. We have already done almost everything wrong that can be done wrong. Benefit from our knowledge too.

20 years of experience = ceramic implants

27 years of experience = biological dentistry

To certify yourself for the purchase of our system you can choose from different online courses. We will be happy to advise you personally on how to get started with SDS. Our competent support team is at your disposal

In our download area you will find our product catalog, the concept brochure and much more.

The special “20+” offers various products and services at a special price when you purchase 20 SDS implants of your choice, such as the OP tray with all drills and much more.

Today we are able to place more than 85% of SDS implants immediately. This requires a special treatment protocol and appropriate training. Surgically oriented Biological Dentistry according to the SWISS BIOHEALTH CONCEPT plays a major role in our training program, where ceramic implants are “only” one component of this unique treatment concept. In our beginner courses 3 HRS FAST LANE CERTIFICATION COURSE, SDSACT and SDSACC with Dr. Volz, the differences between ceramic implants and titanium implants are taught in detail; shown how our SDS implants should be placed correctly, including the special SDS drilling protocol according to bone classes and the complete treatment protocol of surgically oriented biological dentistry is presented – always with the primary goal, “the healthy patient”.

Benefit from our 20 years of experience and learning curve with ceramic implants and over 27 years of expertise in Biological Dentistry, which we are happy to share with you in these two course days.

Since the introduction of the SDS user courses, the success rate of our SDS users has greatly improved and contributed significantly to the benefit of all involved, including the patients.

Further information on our training courses

In 2019, more than 23.000 SDS implants were sold in the DACH region (Germany/Austria/Switzerland).

In total, SDS has more than 500 users for example from Germany, Austria, Switzerland, the United States of America and Japan.

We believe that the bone formed by the body itself is always the best bone and have therefore developed a treatment concept with our special implant forms and the SWISS BIOHEALTH CONCEPT, which in most cases allows to completely dispense with foreign materials.

The dietary supplements we have developed are a key component of the treatment concept and improve our success rates.

Unlike titanium implants, zirconia implants only heal in clean, healthy bone and the dietary supplements help to rebuild bone and soft tissue.

You do not require any instruments or prosthetic parts. The procedure is the same as that for a natural tooth that is being prepared for a crown or bridge restoration: grind, mold, place.

Generally speaking, three months in the lower jaw and six months in the upper jaw. These times can often be reduced if good primary stability has been achieved. Most SDS implants are placed immediately but not loaded.

Generally speaking, three months in the lower jaw and six months in the upper jaw. These times can often be reduced if good primary stability has been achieved. Most SDS implants are placed immediately but not loaded.

SDS ceramic implants are at least as stable as titanium implants. The annual evaluation last year (2019) shows a fracture rate of 0.2% across all products.